Friday, April 12, 2013

Luggage Protector Circuit Using 555 Timer IC

The circuit is called protector alarm circuit to protect from the theft of your luggage or bags. This circuit is built electronically using 555 timer
IC. The alarm will rise highly when the thin wire is cut off by the
thief.  The circuit configuration using 555 timer IC acts as a astable multivibrator which produce signal tone of frequency of about 1 KHz and produce sound like a shrill noise away the output speaker.

If you need to know 555 Timer configuration click here and download
IC’s
5number pin is directly connected to the power supply. 10k, 68k
resistor and 0.01uf capacitor are connected to generate specific range of frequency
like as 1KHz. You can change output frequency by changing the value of
 resistor and capacitor.  Pin 1 is directly connected to the ground.
Output is taken from pin 3. A 8Ohms speaker is connected to the output
for alarm sound. Thin wire is connected as shown in figure.
The
wire would be very thin copper like 36 SWG or higher. You can use one
gage of normal wire. The driving voltage of the circuit is 5 Volt to 12
Volt.

No comments:

Post a Comment

Note: Only a member of this blog may post a comment.